Jump to content
  • 0

Nacelle (gimbal) FY-G3 Feiyu Tech


NajibK

Question

  • Membre VIP

Voici ce que j'ai trouvé en parcourant Facebook aujourd'hui :

 

 

Pour ceux qui sont interressé pour acheter la nacelle FY-G3, s'il vous plait, achetez le directement en contactant Ally, le responsable des ventes de Feiyu-Tech. ally@feiyu-tech.com"

 

Bien sur la communication doit se faire en anglais, je vais contacter cette personne pour savoir si c'est interressant et je vous ferai un retour!

Link to comment
Share on other sites

Recommended Posts

  • 0
  • Membre VIP

Voici la réponse de Ally de Faiyu tech

 

hello Najib
here is ally the sales manager from feiyu-tech
how do you do
thanks for your interests in our product
 
we are the company design,develop ,and produce the flight control system for UAV or FPV
we have all kinds of rc toys and the aircrafts
our price is competitive for we are the manufacture we are the source
we can ensure you the best quality and the strong technical support and the first rate service after sales
any product you can order from me directly i will apply a satisfied price for you
moreover i will apply the lifelong warranty for you
 
to buy from me
1.i will apply the lowest price for you
2.the life long warranty for you
 
for the gimbal if you want 10 sets the price will be $122 per

 

Bonjour Najib, c'est Ally , le respopnsable des ventes de Feiyu Tech, comment allez vous?

 

Merci pour l'interêt que vous portez sur nos produits.

Nous sommes l'entreprise qui conçoit, développe et produit le controleur de vol pour les drone ou l FPV.

 

Nous avons toutes sortes d'appareil RC et d'avions, nos prix sont compétitifs car nous commes les constructeurs. Nous pouvons vous assurez la meilleure qualité ainsi qu'un support technique efficace et aussi un service après vente de qualité.

 

Quelque soit le produit que vous commander auprès de moi directement aura un prix satisfaisant pour vous, et en plus je vous applique une garantie à vie sur nos produits.

 

Pour avoir acheter auprés de moi

1.J'appliquerai le plus bas prix

2.J'appliquerai la garantie à vie

 

Pour les nacelles, si vous en voulez 10, le prix sera de 122$ (90 euros) par unité.

Edited by NajibK
Traduction du texte
Link to comment
Share on other sites

  • 0
  • Membre VIP

A ce jour j'ai reçu les nacelles et la mienne par la même occasion!!! :D

Je l'ai déjà monté sur mon drone, souder et brancher, le seul problème c'est le réglage...

Je ne suis pas parvenu a faire la mise à jour :( et je n'y connais rien au réglage via l'assistant Naza...

Donc c'est à mon tour de vous demander de l'aide :o

Link to comment
Share on other sites

  • 0
  • Membre VIP

Est-ce qu'elle fonctionne déjà normalement en la branchant ?

Le réglage via le Naza ne servira que pour le réglage du Tilt... donc à brancher sur F2 si mes souvenirs sont exacts... dans le Naza tu vas dans le réglage Gimbal...

-1000 0 +1000 c'est là qu'il faut jouer... et comme j'ai pas reçu la mienne, je peux pas te dire si les réglages sont les mêmes que pour la nacelle Tarot...

Link to comment
Share on other sites

  • 0
  • Membre VIP

Merci pour ces infos, j'ai trouvé les mêmes infos sur un autre site et en effet il faut brancher le câble de la nacelle sur F2. Il y a un deuxième cable avec seulement un fil blanc, celui là n'est pas à brancher il faut le laisser de côté.

 

 

Just a follow up to the above.

It is indeed what you need to do to get it working with the NAZA.

DON'T TURN THE GIMBAL ON UNTIL THE BELOW IS DONE

- Red/Black into the F2 port (leave the white cable off)
- NAZA Assistant - make sure you first calibrate your X1 channel. Fully left should be 1000, centre should be 0 fully right -1000.
- Assuming you've done the above then go into Advanced - Gimbal.
- Set Max to 1000
- Set Center to 0
- Set Min to -1000

All other settings just leave alone.

Make sure these settings are in place and written to the NAZA and THEN turn the Gimbal on. You should find everything working.

You will likely find that once you pitch forward it won't stop unless you move the lever back. I think this is how Feiyutech have designed the latest 1.24 firmware.

"Laissez éteinte la nacelle avant de suivre les instructions ci dessous

 

  • le câble rouge/noir se connecte dans le port F2 du Naza (laisser le câble blanc débranché)
  • Via l'assistant Naza, assurez vous de calibrer la canal X1, le max gauche doit être sur 1000, centre a 0 et max droite -1000.
  • En supposant que vous ayez suivi les instructions ci dessus allez dans la partie "advanced - Gimbal"
  • Activer les réglages en selectionnant "on"
  • Régler F2 max sur 1000
  • Régler F2 centre sur 1000
  • Régler F2 min sur 1000

Ne touchez pas aux autres réglages

 

Assurez vous que les réglages sont bien saisi et écrits dans le Naza et ensuite redémarrer la nacelle, tout devrait fonctionner correctement.

Link to comment
Share on other sites

  • 0
  • Membre VIP

Attention, tout de même en gardant les données -1000/0/1000 du F2 Naza, de bien veiller à ce que la nacelle n'arrive pas trop vite en butée lors de l'utilisation en tilt. Ces données sont pour la course de votre contrôle du tilt... en laissant sur les données actuelles votre nacelle en activant le tilt au maxi de sa course va donc passer du quasi 360 ° en avant à environs - 60 ° en arrière (butée pour stopper).

 

Le plus simple étant je pense un angle maxi de 100° en avant vers le bas par rapport à votre horizon et -10° si vous voulez filmer les hélices...

 

Mais je dis ça... peut-être que c'est parfait... d'origine... j'en doute. J'ai du modifier les données F2 via X1 pour une utilisation de la nacelle Tarot... je suppose qu'il en sera de même pour cette dernière.

Link to comment
Share on other sites

  • 0
  • Membre VIP

ça peut certainement aider... en Anglais c'est un fait... mais il y a des liens actifs pour les firmwares de la nacelle...

 

First the downloads. All are zip files:

1) Go to http://www.feiyu-tech.com/product-en...3&id=39&step=3
2) Download the: G3 Gimbal Firmware Software
3) Download the latest: G3 Gimbal Firmware (sorted by date)
4) Download the USB Serial Driver: http://www.feiyu-tech.cn/download-en.php?id=37

Next the installs:

5) Unzip the USB Serial Driver (not needed if you have already upgraded before of course)
6) Unzip the "G3 Gimbal Firmware Software"10) Unzip the "G3 Gimbal Firmware"
7) Run the PL2303_Prolific_DriverInstaller_vX.X.X.exe file (X's will have version number). Wait for it to install
8) You need to know what Com Port the USB driver uses. In Windows go to Device manager and look for "Ports (COM & LPT)... expand this section and you should see "Prolific USB-to-Serial Comm Port (COM X).... where X is this will be the number you need to remember.
9) Plug the G3's USB cable into the G3 - DO NOT POWER ON GIMBAL YET (won't work if you do).
10) Go to where you unzipped the Firmware Software and run the "FY-G3 Firmware Upgrade.exe" file. STILL DON'T POWER ON YET!
11) Choose the COM Port that you discovered in step 8 and then click "Open"... nothing will happen yet but don't worry.
12) Click the "Open File" button, navigate to where you unzipped the Firmware .bin file itself and choose the zip file (called "G3PTZv1.20.bin" on this version). You should get a load of text and "FILE OK!" at the end.
13) NOW POWER ON THE GIMBAL ... you should see "LINK OK!" followed by the current version. If you powered it on already (shame on you!) then unplug, close the software and start again from step 10.
14) Click "Update" - You will see it say 'Send Block XX' (X's will equal be numbers 1-100)... this will cycle a couple of times and then it a pop up will appear saying "Send OK" - all done! Simply close the program after this.

 

 

http://www.rcgroups.com/forums/showthread.php?t=2040029

Link to comment
Share on other sites

  • 0

Nacelle montée, alimentée, puis ....

Reglages TILT

 

En 1, j'ai telechargé le Naza-M Assitant V2.20"

 

2- je connecte le phantom au PC (sans Lipo)

 

3- j'ouvre le logiciel Naza

 

je regle le gimbal switch ON

freqency 50/100/200/400

 

servo travel limit

F2  ?
F1  ?

 

automatic control gain

F2  ?

F1  ?

 

Manual control speed ?

 

press enter to write .....

 

selon NajibK tous les F2 à 1000 (post plus haut)

 

.....

rien ne fonctionne

 

merci de m'éclairer sur la procédure à suivre

 

(phantom avec ou sans accu, nacelle connectée, non connectée, RC ON/OFF ?  .....

tellement de config possible, que je m'y perd !!!!!)

Link to comment
Share on other sites

  • 0
  • Membre VIP

Nacelle montée, alimentée, puis ....

Reglages TILT

 

En 1, j'ai telechargé le Naza-M Assitant V2.20"

 

2- je connecte le phantom au PC (sans Lipo)

 

3- j'ouvre le logiciel Naza

 

je regle le gimbal switch ON

freqency 50/100/200/400

 

servo travel limit

F2  ?

F1  ?

 

automatic control gain

F2  ?

F1  ?

 

Manual control speed ?

 

press enter to write .....

 

selon NajibK tous les F2 à 1000 (post plus haut)

 

.....

rien ne fonctionne

 

merci de m'éclairer sur la procédure à suivre

 

(phantom avec ou sans accu, nacelle connectée, non connectée, RC ON/OFF ?  .....

tellement de config possible, que je m'y perd !!!!!)

Avant de connecter ton Phantom, il faut allumer la radio et ensuite connecter la batterie au phantom, puis installer le driver qui se trouve ici : http://download.dji-innovations.com/downloads/driver/DJI_WIN_Driver_Installer.exe

Ensuite connecter ton phantom en usb, attendre l'installation du driver, lancer le soft DJI et faire les réglages pour la nacelle.

Link to comment
Share on other sites

  • 0
  • Membre VIP

Bon... en fait un véritable casse tête pour le réglage de la nacelle... elle ne veut rien savoir... ça marche c'est un fait, mais pas aussi bien que mon autre nacelle Tarot... la programmation c'est pas ça... je viens d'y passer une heure... et ça me prend le chou :wacko:

 

Je sens que je vais remettre la Tarot en service... bien fait de pas la vendre :D

Link to comment
Share on other sites

  • 0
  • Membre VIP

ne pas oublier le driver USB

 

First the downloads. All are zip files:

1) Go to http://www.feiyu-tec....3&id=39&step=3
2) Download the: G3 Gimbal Firmware Software
3) Download the latest: G3 Gimbal Firmware (sorted by date)
4) Download the USB Serial Driver: http://www.feiyu-tec...ad-en.php?id=37

Next the installs:

5) Unzip the USB Serial Driver (not needed if you have already upgraded before of course)
6) Unzip the "G3 Gimbal Firmware Software"10) Unzip the "G3 Gimbal Firmware"
7) Run the PL2303_Prolific_DriverInstaller_vX.X.X.exe file (X's will have version number). Wait for it to install
8) You need to know what Com Port the USB driver uses. In Windows go to Device manager and look for "Ports (COM & LPT)... expand this section and you should see "Prolific USB-to-Serial Comm Port (COM X).... where X is this will be the number you need to remember.
9) Plug the G3's USB cable into the G3 - DO NOT POWER ON GIMBAL YET (won't work if you do).
10) Go to where you unzipped the Firmware Software and run the "FY-G3 Firmware Upgrade.exe" file. STILL DON'T POWER ON YET!
11) Choose the COM Port that you discovered in step 8 and then click "Open"... nothing will happen yet but don't worry.
12) Click the "Open File" button, navigate to where you unzipped the Firmware .bin file itself and choose the zip file (called "G3PTZv1.20.bin" on this version). You should get a load of text and "FILE OK!" at the end.
13) NOW POWER ON THE GIMBAL ... you should see "LINK OK!" followed by the current version. If you powered it on already (shame on you!) then unplug, close the software and start again from step 10.
14) Click "Update" - You will see it say 'Send Block XX' (X's will equal be numbers 1-100)... this will cycle a couple of times and then it a pop up will appear saying "Send OK" - all done! Simply close the program after this.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • 7MLdLhgsgImTr0lo1I3MCxK9BVRrO0aXsX05lYEBm.jpg

    1ff363ae-e2eb-4c23-b219-035a9c7c70c4.jpg

×
×
  • Create New...